Product

Pneumatic Brake
  • Facebook
  • LINE
  • Twitter
  • Sina
  • LinkedIn
DBH Series

DBH Series

Description
Easy to apply braking pressure by piping factory air pressure.
This Pneumatic Disc Brake has high heat resistance and is easy to install.
Suitable for paper making machines, wire drawing machines and amusement equipment.


The type brake is for horizontal-type installation, Add the expandable shrapnel to guarantee the brake balance, The friction part is easy to replace, and it does not contain any asbestos,
To control the deceleration of moving parts for small and medium powers, the best solution is the combination of a brake disc with one or more pneumatic calipers.

DBH-10X series
Torque Formula :

Braking Torque (kgm) =Braking Force (kg) x Effective Disc Radius (Actual)(mm)
Size DBH 104 DBH 105
Maximum under overload 7 kg/cm² 7 kg/cm²
Compression ratio 1.83 1.83
Disc thickness 10 mm 10 mm
Disc O. D. mm 200↑ 200↑
Unit Weight 8.5 kg 9 kg
Every horizontal caliper separate into the left and right type.
Please indicate left or right side type when order.

Torque versus Pressure
Dimension
Size X Y φZ
DBH 104 132 267.5 142
DBH 105 152 285 177

DBH-20X series
Torque Formula :

Braking Torque (kgm) =Braking Force (kg) x Effective Disc Radius (Actual)(mm)
Size DBH 204 DBH 205
Maximum under overload 7 kg/cm² 7 kg/cm²
Compression ratio 1.83 1.83
Disc thickness 20 mm 20 mm
Disc O. D. mm 200↑ 200↑
Unit Weight 9 kg 9.5 kg
Every horizontal caliper separate into the left and right type.
Please indicate left or right side type when order.

Torque versus Pressure
DIMENSION
Size X Y φZ
DBH 204 135 267.5 142
DBH 205 155 285 177
Warning : The initial torque on new units can be 30% to 50% less then the catalogue value until the friction facing and friction disc are lapped or worn in.
NIIKA Limited reserves the right to modify or change the design without prior notice.

History
    3Inquiry
    Contact Us