HC-2A.HC-2AM
Auto edge guide controller
EGC is a major control product that aromatically aligns the edge of webs. Many companies
because of follows advantages have adopted them:
- All movement of material made by uneven speed, pulling stress, material thickness or mechanical damage can be adjusted to the original position by this system.
- Originally reserved material edge can be thus reduced to the minimum to save width of material to be added and reduce cost in material acquisition.
- Increased production, eliminated personnel for watching material and money spent on adjustment of material deviation can also be eliminated so as to reduce your production cost.
- Made your finished product edge smooth and the middle processing elevated of quality, additional value of finished product material increased with much appraisal of down stream customers.
- EGC guides a wide range of materials, including : Plastic Films, Laminated Films, Fabrics, Coated Fabrics, Fiber Materials, Fiberglass, Metal Foils, Papers, Paper Boards. Also, EGC fits onto most type of web machinery, including: Rotogravure presses, Flexography presses. Web offset presses, Label presses, Business Form Presses, Slitters, Sheeters, Die cutters, Bag machines, Bag filling machines, Envelope machines, Laminators, Extruders, Coating machines, Blown film lines, etc.
Description
Features :
˙Traditional auto EPC, economic and practical.
˙Hydraulic pressure adjustable.
˙Sensitive movement, high accuracy.
˙Long service life.
Driving :
˙Motor : 1/2HP、4P 220/380/440 3 phase 50/60HZ
˙Pump capacity: 3L/min-5L/min
˙Oil tank : 2A 8L，
˙Hydraulic pressure : 15kg/cm2
˙Oil : CPC RL68 /SHF 32
˙Temperature : -10℃ ~+60℃
˙oil cylinder : Select from cylinder dimension
Sensor :
˙fluidic : Air
˙air pressure : 200mmH2O
˙Air capacity : 60 L/min,
˙Small: material max thickness : 10mm (standard )
˙Large: material thickness : 11-30mm (option)
Function :
˙cylinder press : 180kg(DIA 40MM cylinder)
˙operating speed : 30mm/sec (Unload)
˙Accuracy : 0.1mm
˙sensitivity : 0.3sec
Other :
˙weight : 2A 40kg，(without cylinder)
˙Installation : horizontal
˙Traditional auto EPC, economic and practical.
˙Hydraulic pressure adjustable.
˙Sensitive movement, high accuracy.
˙Long service life.
Driving :
˙Motor : 1/2HP、4P 220/380/440 3 phase 50/60HZ
˙Pump capacity: 3L/min-5L/min
˙Oil tank : 2A 8L，
˙Hydraulic pressure : 15kg/cm2
˙Oil : CPC RL68 /SHF 32
˙Temperature : -10℃ ~+60℃
˙oil cylinder : Select from cylinder dimension
Sensor :
˙fluidic : Air
˙air pressure : 200mmH2O
˙Air capacity : 60 L/min,
˙Small: material max thickness : 10mm (standard )
˙Large: material thickness : 11-30mm (option)
Function :
˙cylinder press : 180kg(DIA 40MM cylinder)
˙operating speed : 30mm/sec (Unload)
˙Accuracy : 0.1mm
˙sensitivity : 0.3sec
Other :
˙weight : 2A 40kg，(without cylinder)
˙Installation : horizontal
Specification
HC-2A: Air Nozzle Sensor Automatic
This type used to sensing paper, board, foil, rubber, and transparent material but not for mesh materials that edge
without any coating.
